Ps, Cron,at and runlevel






Comments

Post a Comment

Popular posts from this blog

RHEL 7

RHEL 7 ..... ************************RHCSA Version 7 **************** Initial configuration.txt: *you have been provided a virtual box named as serverX.example.com (hint:where X is your domain number) * password for both virtual machine should be "Postroll" *serverX.example.com provided with ip=172.25.X.10/255.255.255.0 *serverX.example.com are provided with gateway 172.25.254.254 & example.com dns domain with the IP: 172.25.254.254 gateway 172.25.0.1 netmask 255.255.255.0 nameserver 172.25.254.250 1) configure your systems that should be running Enforcing 2) create a new 100MB Physical partition mounted under /Gluster (Note because partition sizes are seldom exactly what is specified when they are created, any thing within the range of 70MB to 120MB is acceptable) 3) create a new 150MB swap partition f/s. (Note because partition sizes are seldom exactly what is specified when they are created, any thing within the range of 13...
Read more

Configure TLS SSL 389 Directory Server CentOS

Image
389 Directory server is an amazing MultiMaster LDAP solution. Out of the box 389 is not configured to use TLS/SSL, so we are going to walk through the setup process. Please note, that we are using this as a test, so we are using a self-signed certificate, but the directions should work for both scenarios. login, and su to root Generate the Self-Signed Certificate: change to the necessary directory, and setup a few files for the CA now generate the key/certificate setup your certificate as appropriate set permissions on the cert key now we need to make sure certificate matching is disabled (unless you are using a full cert) modify lines 85-88 as follows: Generate and Self-Sign Certificate launch the 389-console open the directory server you were just working on, and click "Manage Certificates" Servername –> Directory Server –> Manage Certificates set, and REMEMBER ...
Read more

Transfer Files Between a Windows 8 PC and a Windows 7 PC

Image
Transfer Files Between a Windows 8 PC and a Windows 7 PC Have you installed Windows 8 on a spare PC and now need to get files from that PC to your Windows 7 PC, or vice versa? It is easy to network the two machines if they are both on your home network. We’ll show you how you can share files between a Windows 8 PC and a Windows 7 PC by sharing a folder on the Windows 7 machine and then mapping to that folder in Windows 8 as a network drive. First, you need to share a folder on your Windows 7 PC. You could just share your C: drive and have access to all folders from Windows 8. However, we recommend you create a special folder for transferring files. That way, you limit access to your Windows 7 PC. Create a new folder somewhere on your Windows 7 PC, right-click on it, and select Properties from the popup menu. On the Properties dialog box, click the Sharing tab and then click Advanced Sharing. On the Advanced Sharing dialog box, click the Share this folder check box ...
Read more